Wednesday, December 10, 2014

LEICA M9 WHITE SPOT SENSOR PROBLEMS



For a while now, some users of the Leica M9 have reported problems with white spots appearing in their images.  Sensor cleaning is not the issue because any dirt shows up in form of dark spots or streaks.  The problem apparently lies in the glass cover plate; the spots are caused by corrosion.

Leica today issued a response to the problem by saying:

Important Information Concerning the CCD Sensors of the Leica M9 / M9-P / M Monochrom / M-E

In some cases, particularly when using the camera models Leica M9, M9-P, M Monochrom or M-E with smaller apertures (5.6-22), effects caused by corrosion of the sensor glass may be encountered. Leica offers a free replacement service for the CCD sensors of cameras affected by this problem as a goodwill arrangement. This goodwill arrangement applies regardless of the age of the camera and also covers sensors that have already been replaced in the past. Customers who have already been charged for the replacement of a sensor affected by this problem will receive a refund.

We have now identified the problem and are currently concentrating our efforts on finding a permanent technical solution. The marks on images mentioned earlier are related to the properties of the CCD sensor. The sensors are equipped with a specially coated IR filter cover glass to ensure optimum imaging performance. Should this coating layer be damaged, corrosion effects that alter the filter surface may begin to appear after several years.

The effect described does not affect the CMOS sensor of the Leica M (Typ 240). Should you be considering an upgrade from your camera to a Leica M or M-P (Typ 240), Customer Care would be pleased to make you an attractive offer following a check of your camera and under consideration of the model and its age.

If the imaging quality of your camera gives cause for complaint in this respect, we recommend that you send it directly to Leica Customer Care or the authorized Customer Care department of your country’s Leica distributor. As longer waiting times may otherwise occur, the camera should only be sent to Customer Care after prior arrangement.

Contact: Web site:  http://en.leica-camera.com/Service-Support/Repair-Maintenance
E-mail: Customer.Care@leica-camera.com. 
Telephone: +49-6441-2080-189.

For us, it is important that we offer only technically faultless products. We are therefore particularly sorry if the imaging quality of your camera should be adversely affected in any way. We hope that the goodwill arrangement we have decided upon will allow us to remedy the problem as soon as possible and rebuild and maintain the trust you have always placed in our brand.


That is a very positive reaction and Leica is to be commended for standing behind their products in this manner.



No comments:

Post a Comment